Xerox DocuMate 515 Betriebsanweisung PDF herunterladen (Seite 85)

Maintenance

80 DocuMate 515 Scanner User’s Guide

Problem: Paper is jamming constantly in the ADF.

To reduce the number of paper jams, smooth and straighten the paper

before scanning, and adjust the guides to the paper size. Paper fed into

the ADF at an angle can cause the feed mechanism to jam. If paper jams

are occurring more frequently, try cleaning the roller with a soft cloth

dampened with Isopropyl rubbing alcohol. Excessive dust on the roller

can make it appear worn and will also cause issues feeding paper. See

“Cleaning the Automatic Document Feeder” on page 76 for cleaning

instructions.

Problem: The ADF won’t feed pages properly.

A dirty or worn ADF pad assembly or dirt on the roller can cause

documents to feed in skewed at an angle, or multiple pages to feed at the

same time. Try cleaning the roller first. See “Cleaning the Automatic

Document Feeder” on page 76. If that doesn’t solve the problem, the pad

assembly may need to be replaced. See “Replacing the ADF Pad

Assembly” on page 78 for the steps to replace the pad.

Problem: The paper jams about halfway through the

scan.

Check the Flatbed glass to make sure no items are on it when you scan

from the ADF. Multiple items placed on the Flatbed glass will raise the lid

slightly, thus preventing the pages feeding through the ADF from touching

the glass. When that occurs, the pages are unable to feed back out of the

ADF and the pages can jam.

Problem: The scans from the ADF are always crooked.

Make sure to align the paper guides to the edges of the paper. If you are

scanning small items that are smaller than the paper guides’ minimum

adjustment, scan these items on the Flatbed glass instead.

Problem: If the USB cable is disconnected during a scan,

the scanner does not reconnect when the USB cable is

plugged back in.

Unplug the power cable from the scanner, and then plug it back in.

If the scanner does not reconnect:

1. Unplug the power cable from the scanner.

2. Restart your computer.

3. After the restart is complete, plug the power cable back in.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 104 105

Keine Kommentare

Xerox DocuMate 515 Betriebsanweisung Seite 85