Xerox 5222 Bedienungsanleitung PDF herunterladen (Seite 39)

Power On/Off

Stored Programming

Allows you to store frequently-used settings as a program and recall them with just one

button. This service is not available on the All Services screen by default, but can be

displayed by the System Administrator. For instructions on how to display the service

on the All Services screen, refer to the System Administration Guide or ask your

System Administrator. For more information on this feature, refer to the

Stored

Programming chapter on page 159

or the Setups chapter in the System Administration

Guide.

Power On/Off

Powering On

Ensure that the machine is connected to a suitable power supply and that the power

plug is firmly connected to the electrical outlet.

The machine is ready to make copies after a maximum of 26 seconds from powering on

(varies with the machine configuration).

Press the power switch to the <I>

position.

NOTE: If the machine does not start

up, check that the RESET button on

the back of the machine is in the reset

position (depressed).

Powering Off

Before switching off the machine, wait at least 5 seconds after all copy or print jobs

have completely finished.

After you switch off the machine, it remains on for approximately 10 seconds while it

stores files on the hard disk drive and prepares for shutdown. The machine then shuts

down completely. Be careful not to unplug the power cord immediately after you switch

off the machine.

NOTE: If the machine is switched off while processing data stored in the memory, the

data may be lost.

NOTE: When switching on the machine again, wait at least 10 seconds after the touch

screen is turned off and the machine completely shuts down.

TEST button

RESET button

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 181 182

Keine Kommentare

Xerox 5222 Bedienungsanleitung Seite 39