Xerox DocuPrint Network Laser Printers Bedienungsanleitung PDF herunterladen (Seite 101)

Quick Step (OS/2 Warp Server V 4.0)

Chapter 7: OS/2 Network Setup ❖ 7-5

Troubleshooting

Check cables/drops. Are the LEDs active?

Print Settings. Check Enabled=ON, IPADDRESS=dhcp/

bootp/static (make sure the IP Address resolution is set

properly. Use DHCP if your network uses a DHCP server to

assign IP addresses. Use RARP/BOOTP if your network uses

BOOTP to assign IP addresses, and use STATIC if you wish

to assign a specific IP address).

You may set a Static IP Address form the control

panel if your printer has one. If you are connected

to a network with a Xerox CentreDirect External

Print Server (External Ethernet Adapter) then use

ARP or NBMON Utility to set a Static IP Address.

Printer Properties - Using LPD Output Port. WIN-OS2

using LPRMON.

Watch LPRPORTD Screen - Is there Activity? In printer

input light processing?

It may take a few prints before initial quality responds.

Print 10-20 pages first.

Refer to the DocuPrint System Administrator Guide for

additional information.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 123 124

Keine Kommentare

Xerox DocuPrint Network Laser Printers Bedienungsanleitung Seite 101