Xerox ColorQube 8580 Betriebsanweisung PDF herunterladen (Seite 41)

Network Connectivity

Xerox

ColorQube 8580/8880 Color Printer 41

System Administrator Guide

Configuring the SNMP Access Control List

You can use the SNMP Access Control List to set up a list of hosts that are authorized to access the

printer.

To configure the Host Access List:

1. In CentreWare Internet Services, click Properties > Protocols.

2. Click SNMP.

3. For Host Access List, type up to 10 host IP addresses. Separate Host Access List entries with a blank

or a comma, or to specify a range, use a hyphen. To represent a group of addresses, for example

13.62.156.*, use an asterisk.

4. Separate Host Access List entries with a blank or a comma, or to specify a range, use a hyphen.

5. Click Save Changes.

Disabling and Enabling SNMP

If SNMP is not needed, to prevent unauthorized access to the printer, you can disable it in CentreWare

Internet Services.

If you disable SNMP, the following print driver features are also disabled.

• Walk-Up Installer

• Smart Trays

• PhaserSMART

• Automatic supplies ordering

• Consumable levels

• Warning and error status

• Synchronization with installed options, including a hard drive, memory, or extra trays

To disable or enable SNMP:

1. In CentreWare Internet Services, click Properties > Protocols.

2. Click SNMP.

3. For SNMP Enable/Disable, click Disable SNMP Now or Enable SNMP Now.

4. Click OK.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 92 93

Keine Kommentare

Xerox ColorQube 8580 Betriebsanweisung Seite 41